Arban RTU

  Arban-TC is an insecticide that is effective against Termites control. Arban TC forms a repellent barrier in the soil, preventing Termites from making entry into the building. Chlorpyrifos is an organophosphate insecticide that is commonly used to control a variety of pests, including Termites. The 20% EC formulation indicates that it is a 20% emulsifiable concentrate, which means it is a liquid formulation that can be mixed with water for application. It is important to note that while Chlorpyrifos can be effective in controlling Termites, its use is subject to regulations and guidelines due to potential human health and environmental concerns. Always follow the recommended application rates, safety precautions, and guidelines provided by the product label and local regulatory authorities. Additionally, consider alternative and more environmentally friendly methods of Termite control when possible.

• Formulation: 20% emulsifiable concentrate (EC), mixable with water/oil
• Effective Termite Control: Forms a repellent barrier in soil
• It provides rapid knockdown against targeted insects
• It kills the termites on contact & serves as fast in action

• Pre-Construction: Creates a soil barrier to repel termites.
• Post-Construction: Forms a protective zone around and beneath the building.

Mix 1 L of Arban TC (Chlorpyriphos 20% EC) in 19 L of water to prepare desired solution (50 ml/1 L of water)

1. Maintain full atropinization by repeated doses of 2 to 4 mg of atropine sulphate intravenously at 5-10 minute intervals. 25-50 mg of atropine may be required in a day.
2. Do not use oximes (e.g., 2-PAM).
3. Provide artificial respiration if needed.

100 ml, 250 ml, 500 ml, 1 L, 5 L, 20 L 

• Temi-Secure (Bifenthrin 2.5% EC) shall be applied at 0.05% a.i. concentration. i.e., 20 ml of formulated product diluted in 1 L of water for the control of termites in buildings during pre and post construction. Treatment should be as per IS 6313 (Part 2): 2001 for pre-construction chemical treatment and IS 6313 (Part 3) : 2001 for post construction treatment of the existing building.

• Method of application : Glue Line Poisoning Dipping
• Dosage (a.i.): 10g/cubic meter of wood 0.025% Solution
• Dilution : 400 ml formulation per cubic meter of wood. Mix 1 L of Formulation in 99 L of water to make 0.025% solution

• Method of application: Dipping
• Dosage (a.i.): 0.025% Solution
• Dilution: Mix 1 of formulation in 99 L of water to make 0.025% solution

• Method of application: Dipping & Brushing
• Dosage (a.i.): 0.025% Solution
• Dilution: Mix 1 L of formulation in 99 L of water to make 0.025% solution

No specific antidote is known. Treat symptomatically.

100 ml, 1 L, 5 L, 20 L 

• Low toxicity
• Low dosage & cost-effective
• Safe to human beings and non-target animals
• Domino effect as a colony destroyer

Fipronil disrupts normal nerve influx transmission by targeting the GABA-gated chloride channel, causing excessive neural excitation, severe paralysis, and insect death.

No specific antidote is known. Treat symptomatically.

• Pre Construction: 10 ml /1L of water
• Post Construction: 10 ml /1L of water

100 ml, 500 ml, 5 L 

Imidacloprid 30.5 SC shall be applied at 0.075% a.i. concentration. i.e. 2.1 ml. Formulated product diluted in 1 Liter of water for the control of Termites during pre and post-construction of building. Treatment should be as per IS 6313 (part 2) 2001 for pre-construction chemical treatment and IS 6313 (part 3) 2001 for post-construction treatment.

• Lateral soil movement, i.e. ability to spread in all directions of soil, ensuring thorough soil coverage with no gaps
• Safe to human beings & Non-target animals
• Odorless & Low toxicity
• Low dosage & cost-effective
• Serves as a colony destroyer

Systemic insecticide with contact & Ingestion action

No specific antidote is known. Treat symptomatically.

Formulation – 2.1 ml /1 L of water

250 ml, 1 L, 5 L